WATER DIVERSIONS TO THE NORTH AMERICAN PRAIRIES1

ABSTRACT .The major purpose of existing and proposed diversions of water to the Prairies is for irrigation. Being flat lands adaptable to mechanized agriculture and possessing a good network of rail and highway access, they are well suited for such use. Wheat surpluses, currently a serious problem in Canada, can be expected to melt under world population pressures and conversion of wheat lands to other crops with the advent of irrigation. The water sources envisaged are in the Canadian Arctic watershed with the United States purchasing Canadian water at the boundary. There is an increasing interest in the Canadian Prairie Provinces in regarding water as a commodity and selling some of it to pay for the development required to put the portion retained in Canada to use.     

Simultaneous nitrification and denitrification with anoxic phosphorus uptake in a membrane bioreactor system.

The performance of an innovative membrane bioreactor (MBR) process using anoxic phosphorus uptake with nitrification and denitrification for the treatment of municipal wastewater with respect to operational performance and effluent quality is addressed in this paper. The system was operated at steady-state conditions with a synthetic acetate-based wastewater at a hydraulic retention time (HRT) of 12 hours and on degritted municipal wastewater at a total system HRT of 6 hours. The MBR system was able to achieve 99% biochemical oxygen demand (BOD), chemical oxygen demand (COD), and ammonia-nitrogen (NH4(+)-N); 98% total Kjeldahl nitrogen (TKN); and 97% phosphorus removal, producing effluent BOD, COD, NH4+-N, TKN, nitrate-nitrogen, nitrite-nitrogen, and phosphate-phosphorus of <3, 14, 0.2, 0.26, 5.8, 0.21, and <0.01 mg/L, respectively, at the 6-hour HRT. The comparison of the synthetic and municipal wastewater run is presented in this paper. Steady-state mass balance on municipal wastewater was performed to reveal some key features of the modified MBR system.     

Toxicity of hexahydro-1,3,5-trinitro-1,3,5-triazine to larval zebrafish (Danio rerio)

Hexahydro-1,3,5-trinitro-1,3,5-triazine, a cyclonitramine commonly known as RDX, is used in the production of military munitions. Contamination of soil, sediment, and ground and surface waters with RDX has been reported in different places around the world. Acute and subacute toxicities of RDX have been relatively well documented in terrestrial vertebrates, but among aquatic vertebrates the information available is limited. The objective of this study was to characterize the acute toxicity of RDX to larval zebrafish. Mortality (LC50) and incidence of vertebral column deformities (EC50) were two of the end points measured in this study. The 96-h LC50 was estimated at 22.98 and 25.64 mgl(-1) in two different tests. The estimated no-observed-effective-concentration (NOEC) values of RDX on lethality were 13.27+/-0.05 and 15.32+/-0.30 mgl(-1); and the lowest-observed-effective-concentration (LOEC) values were 16.52+/-0.05 and 19.09+/-0.23 mgl(-1) in these two tests, respectively. The 96-h EC50 for vertebral deformities on survivors from one of the acute lethality tests was estimated at 20.84 mgl(-1), with NOEC and LOEC of 9.75+/-0.34 and 12.84+/-0.34 mgl(-1), respectively. Behavioral aberrations were also noted in this acute toxicity study, including the occurrence of whirling movement and lethargic behavior. The acute effects of RDX on survival, incidence of deformities, and behavior of larval zebrafish occurred at the high end of the most frequently reported concentrations of RDX in aquatic environments. The chronic effects of RDX in aquatic vertebrates need to be determined for an adequate assessment of the ecological risk of environmental RDX.     

Modeling the formation of chlorination by-products in river waters with different quality

Water chlorination results in formation of a variety of organic compounds, known as chlorination by-products (CBPs), mainly trihalomethanes (THMs) and haloacetic acids (HAAs). Factors affecting their concentrations have been found to be organic matter content of water, pH, temperature, chlorine dose, contact time and bromide concentration, but the mechanisms of their formation are still under investigation. Within this scope, chlorination experiments have been conducted with river waters from Lesvos island, Greece, with different water quality regarding bromide concentration and organic matter content. The factors studied were pH, time and chlorine dose. The determination of CBPs was carried out by gas chromatography techniques. Statistical analysis of the results was focused on the development of multiple regression models for predicting the concentrations of total trihalomethanes and total HAAs based on the use of pH, reaction time and chlorine dose. The developed models, although providing satisfactory estimations of the concentrations of the CBPs, showed lower correlation coefficients than the multiple regression models developed for THMs only during previous study. It seems that the different water quality characteristics of the two river waters in the present study is responsible for this phenomenon. The results indicate that under these conditions the formation of THMs and HAAs in water has a more stochastic character, which is difficult to be described by the conventional regression techniques.     

Comparison of photochemical behavior of various humic substances in water: I. Sunlight induced reactions of aquatic pollutants photosensitized by humic substances

Humic substances are shown to photosensitize transformations of several types of synthethic chemicals that do not photoreact when exposed to sunlight in distilled water. In most cases, photoproducts were the same in colored natural waters and in solutions of soil-derived humic substances, including those obtained commercially. Kinetic studies in sunlight indicated that the efficiencies of the reactions photosensitized by humic substances of various origins were the same within a factor of 2.     

The concentration, apparent molecular weight and chemical reactivity of silica from groundwater in southern Nevada

Sorption of radionuclides, metals and organic compounds to colloidal particles has been suggested to increase the mobility of these pollutants in groundwater. Because silicates and alumino-silicates can be important components of groundwater colloids, we have conducted a study to characterize the nature of silica in various springs and wells in Southern Nevada and to determine the extent that silica may be associated with colloidal particles that can participate in pollutant transport. The total silica content was measured using inductively coupled plasma emission spectroscopy (ICP). In addition, reactive silica was measured using the silica molybdate colorimetric technique. The apparent molecular weight of the silica was investigated using split-flow-lateral-transport-thin-cell-fractionation (SPLITT) which can readily distinguish between colloidal and low molecular weight associations. This study indicates that silica does not tend to form stable inorganic colloids in Southern Nevada groundwaters but exists as low molecular weight species. However, water from one of the test facilities on the Nevada Test Site (NTS) did contain stable siliceous colloids that could have important implications for the modeling the transport of radionuclides at this site.     

Remediation of MTBE from drinking water: air stripping followed by off-gas adsorption

The widespread use of methyl tertiary butyl ether (MTBE) as an oxygenate in gasoline has resulted in the contamination of a large number of ground and surface water sources. Even though air stripping has been proven to be an effective treatment technology for MTBE removal, off-gas treatment often is required in conjunction with it. This study evaluated the combined treatment technologies of air stripping followed by off-gas adsorption on a pilot scale for the treatment of MTBE-contaminated water. The effect of air/water ratios on the treatment efficiency was studied, and the mass transfer coefficient was determined. Air/water ratios of 105:1, 151:1, 177:1, 190:1, 202:1, and 206:1 were used, and a treatment efficiency of >99% was achieved for all the runs conducted. The depth of packing required to achieve maximum treatment efficiency decreased with increasing air/water ratio. Relative humidity (RH) impacts on the MTBE adsorption capacity of a granular activated carbon (GAC) and carbonaceous resin were determined from pilot plant studies. Breakthrough profiles obtained from the pilot plant studies conducted at 20, 30, and 50% RH indicated that GAC has a higher adsorptive capacity than resin. The adsorptive capacity of GAC decreased with increasing RH, whereas RH did not impact the resin adsorptive capacity.     

Development of emission factors for polycarbonate processing

Emission factors for selected volatile organic compounds (VOCs) and particulate emissions were developed while processing eight commercial grades of polycarbonate (PC) and one grade of a PC/acrylonitrile-butadiene-styrene (ABS) blend. A small commercial-type extruder was used, and the extrusion temperature was held constant at 304 degrees C. An emission factor was calculated for each substance measured and is reported as pounds released to the atmosphere/million pounds of polymer resin processed [ppm (wt/wt)]. Scaled to production volumes, these emission factors can be used by processors to estimate emission quantities from similar PC processing operations.     

THE UNITED NATIONS GROUND WATER EXPLORATION AND DEVELOPMENT PROGRAMME - A FIFTEEN YEAR PERSPECTIVE

The United Nations ground water exploration and development programme during 15 years of active life, has resulted in substantial socio-economic benefits to 57 developing countries through some 100 ground water projects. Systematic study, development and use of this important resource have contributed to intensification of agricultural production through supplemental irrigation from ground water; alleviation of water shortages in urban and industrial areas through construction of supply wells; improvement and stabilization of pastoral and rural economies, thereby counteracting in some measure adverse demographic trends of migration to the cities; and other related benefits in training, institutional development, and development of national water policies and plans.     

Assessment of relative accuracy in the determination of organic matter concentrations in aquatic systems

Accurate determinations of total (TOC), dissolved (DOC) and particulate (POC) organic carbon concentrations are critical for understanding the geochemical, environmental, and ecological roles of aquatic organic matter. Of particular significance for the drinking water industry, TOC measurements are the basis for compliance with US EPA regulations. The results of an interlaboratory comparison designed to identify problems associated with the determination of organic matter concentrations in drinking water supplies are presented. The study involved 31 laboratories and a variety of commercially available analytical instruments. All participating laboratories performed well on samples of potassium hydrogen phthalate (KHP), a compound commonly used as a standard in carbon analysis. However, problems associated with the oxidation of difficult to oxidize compounds, such as dodecylbenzene sulfonic acid and caffeine, were noted. Humic substances posed fewer problems for analysts. Particulate organic matter (POM) in the form of polystyrene beads, freeze-dried bacteria and pulverized leaf material were the most difficult for all analysts, with a wide range of performances reported. The POM results indicate that the methods surveyed in this study are inappropriate for the accurate determination of POC and TOC concentration. Finally, several analysts had difficulty in efficiently separating inorganic carbon from KHP solutions, thereby biasing DOC results.